Roof pipe flashing designed for residential roofs covered with tar paper shingles, cement, or ceramic tiles. Can be used as either a standard or retrofit application.
- Made of high-temp silicone with soft aluminium base, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light
- Available in 2 colours – red and grey
- 1 size to fit 0” to 5 3/8” (0-136mm) diameter pipes
- The built in 20º pitch allows adaptability to almost any roof pitch, including a 45º one
- Square base
- Installed by either sliding down the pipe or from wrapping at the side
- Stainless steel gripper and termination strip included
- Ideal solution for roofs covered in shingle, ceramic, or cement tiles
- Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction
- Temperature resistance: -74°C to 225°C continuous (+260°C intermittent)
- Ozone resistance: 70 hour @ 500 pphm
| PICTURE | ITEM SYMBOL | ITEM NAME |
PIPE SIZE standard installation |
PIPE SIZE retrofit installation |
BASE TYPE | SILICONE COLOUR | TOP OPENING | BASE DIMENSIONS | TECHNICAL DRAWING |
|---|---|---|---|---|---|---|---|---|---|
 |
EMC102RS |
MASTER FLASH® ELECTRICAL MAST CONNECTION |
0 – 136mm |
0 – 136mm |
SQUARE |
RED |
CLOSED |
381mm |
| Picture | Color | RAL No. | |
|---|---|---|---|
 |
|
Grey |
RAL7035 |
 |
|
Red |
RAL8004 |
Although colour stabilizers are milled into the primary raw material, a slight fading is to be expected over time. The properties and guarantees of the product will not be affected.
Edit Template